With the installation of your beautiful, invisible cable rail system complete, you can now enjoy the unobstructed view from your deck for many years to come. For making a stainless steel railing system shine in the short term, a non-chloride containing stainless steel cleaner can used as needed. To maintain a stainless steel railing system over the long term, a passivation solution will need to be applied periodically to recondition the surface. Wait 15-30 minutes for the solution to completely clean and passivate the surface. On round handrail the grain runs around the rail not lengthwise. To clean stainless steel posts, apply some passivation solution on a soft rag or non abrasive pad and apply to the surface in same direction of the brushed finish grain. The AGS – Stainless Steel Cleaning & Maintenance Kit includes a non-abrasive cleaning pad, passivation solution, and an instruction booklet that explains how to clean railings under the C learview brand. Use a soft rag or non-abrasive cleaning pad rather than steel wool or steel brushes for cleaning to avoid cross-metal contamination or leaving scratches on stainless steel posts with a beautiful finish. Using two 7/16″ wrenches, hold the jam nut in place with one wrench and tighten the acorn nut against the jam nut locking it in place.Ĭlean the railing system as needed and passivate the surface on a regular basis. If the cables are overly tightened, the combined force from the cables can bend or deform posts.

Tighten jam nuts with a 7/16″ wrench to tension the C learview® – Cables until they are “just” taut. AGS – Cable Crimpers use compression for connecting a cable to a fitting. Crimping cables involves inserting them into fittings. Crimping will be required unless swageless fittings are used, which can be released with a simple release key. AGS – Cable Cutters are made of hardened steel and have shear blades with a bypass design that are exceptional for use with C learview® – Cables.Ĭrimp cable twice and insert the cable into the C learview® – Standard Cable Fitting and crimp both sides for attaching a cable to a post. To cut the cable hold the C learview® – Cable taut with one hand, hold the AGS – Cable Cutters against the post, and cut the C learview® – Cable. The posts are pre-drilled with a fiber laser cutting machine during the fabrication stage. Rainier cable railing systems under the C learview® brand generally use C learview® – Cables. 250', Stainless Sales Corporation provides sales, support and inventory management to companies across several continents. To thread the end posts, pull the C learview® – Cable through the hole in the end post. THE SOURCE FOR STAINLESS STEEL STRIP COIL An ISO/TS-registered, woman-owned business focused solely on stainless steel slit coil from gauges. Slide the C learview® – Cable through all of the holes in the intermediate posts (the ones between the end posts).

Stainless steel en espanol